BFE Series

Design Features

  • Standard sizes from 2” – 24”. Larger sizes available upon request
  • Available In flanged to BS 10 TAB ‘E’or Butt-weld end connections
  • Standard thru bolt cover design
  • Perforated screens are standard
  • May be installed in horizontal pipelines
  • Drain/ vent with plug is is standard
  • Body diameter 1 size higher than the line size
  • Commercial strainer where higher pressure drop is allowable
  • Net free straining area minimum 4 times for standard screens
  • Hydro tested to 12 bar

Material Data

Component Materials
Body CS to IS1239,3589 Class A / CS TO IS 2062
Cover  CS TO IS 2062
Fastener CS TO IS 1367
Gaskets CAF,Neoprene, NItrile
Drain / Vent Plug A105, CS TO IS 1875-II, Stainless Steel
Filter Element SS 304,316

* Other materials available on request.

Standard Screens

Size Range Opening
2″-8″( 50mm-200mm) 0.125 IN. (3.2mm)
10″-12″(250mm-300mm) 0.125 IN. (3.2mm)
14″-24″(250mm-600mm) 0.188 in. (4.8mm)

Dimensions

Size
mm
A
mm
B
mm
C
mm
D
mm
E
mm
25 175 259 159 33 227
40 218 222 110 48 281
50 264 314 185 60 326
65 267 392 255 76 417
80 315 440 278 89 493
100 349 451 258 114 616
150 406 685 500 165 917
200 536 598 376 219 1111
250 609 578 318 273 1111
300 678 594 290 324 1516
350 760 744 412 356 1409
400 799 929 494 406 1650
500 908 912 456 508 1923
600 1000 1272 772 600 2433
700 1100 1328 728 700 2779
750 1100 1456 806 750 2966
900 1575 2284 1446 900 3592
1000 1800 2185 1240 1000 3819
1100 1955 2271 1226 1100 4230