YFP Series

Design Features

  • Standard sizes from 2” – 24”
  • Flanged to ANSI, DIN, IS ,BS and Butt welded connections are available
  • Rated to 150 lbs and 300lbs as standard. Higher ratings can be made on request
  • Bolted covers are standard
  • May be installed in horizontal or vertical pipelines
  • Qualified welders as per ASME SEC VIII.DP of welds are standard Radiography of welds can be done on request
  • Covers are made of ANSI ,DIN,IS,BS With rating equal to the connection flanges
  • Drain/blow off connections are provided with plugs as standard
  • Vents, differentials and special covers are optional
  • Guaranteed low pressure drop as per Table – 1
  • Net free straining area 4 time pipe c/s area

Material Data

Body IS1239,3589 ASTM A106, SS304/316, DUPLEX STEEL
Cover A105, SA 516 GR 70, CS TO IS 2062, SS316,304, DUPLEX STEEL
Fastners A193 B7 Bolts & A 194 2 H Nuts with
With spring washer. SS 304/316
Gaskets CAF, NACF, Neoprene, NItrile,PTFE
Drain Plug A105, CS TO IS 1875-II, Stainless Steel
Filter Element SS 304,316, Duplex, Brass, Monel, Hastalloy C

* Other materials available on request.

Standard Screens

Size Range Opening
2″-8″( 50mm-200mm) 0.125 IN. (3.2mm)
10″-12″(250mm-300mm) 0.125 IN. (3.2mm)
14″-24″(350mm-600mm) 0.177 in. (4.5mm)

Dimensions

Size
mm
A
mm
B
mm
C
mm
End Type Flanged Flanged Flanged Grooved
50 275 209 297
65 340 248 365 357
80 340 307 486 375
100 375 382 594 470
125 438 471 742 533
150 559 539 855 654
200 610 766 1267 821
250 800 902 1485 1041
300 832 1034 1710 1194
350 1010 1177 1940
400 1149 1312 2270
450 1232 1453 2404
500 1365 1595 2639
600 1626 2035 3419

Fabricated Y Strainer Pressure Drop — Liquids (Sizes 50-600mm)

Note: Pressure drop curves are based on water flow with standard screens.